Part Story
Companion Flanges
Part Number 3301-201
- Spline Count: 32
- Spline Diameter: 1.401
- Hub Diameter: 2.125
- Thru Hole: 2.000
- Face To End: 2.125
- Pilot Diameter: 2.000
- Bolt Circle Diameter: Dual
- Notes: 3.500 & 4.25 threaded bolt holes
Part Story
This companion flange can be used to build a rear CV shaft off the NP203 or NP205 transfer cases. This flange will mate to a 1310, 1330, 1350, and 1410 flanges and CVJ heads with 2 inch pilot.
Mating part numbers: 3502-21, 211631X, 211229X, 3594-2000U, etc.
**holes may have to be drilled depending on mating component**
Threaded: M12-1.75, see N800594-S100 bolt
Seals for 2.125" ID, 3.063" OD: TK50092, 473468, 473204, etc.