Parts by Type

print This page

Companion Flanges

PART NUMBER SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE PILOT DIA. BOLT CIRCLE DIA. BOLT HOLES FACE TO END NOTES VEHICLE CLASS BRAND
3101-345X 2.820 5.000 4.250 12 Caravan adapter for 3190-100 CVJ LD PTI
3101-1081 5.354 3.386 12 MV1 aluminum adapter for 136mm front CVJ, runs 3152-1081. Uses stock 14mm hardware with supplied M10-1.5 LD PTI
FR3Z-4851-B 4.330 3.660 M10.1.5 Ford Mustang 15-22 w/o Shelby option, fits 3502-433X LD Ford
68533579AA Ram 1500 TRX 2021-2024, serrated, front t-case LD MOPAR
3401-102 10 1.500 1.772 2.000 2.245 4.000 4 3.455 Sprinter, threaded bolt holes, male pilot LD PTI
3-1-2011 10 1.375 2.125 2.000 2.750 3.750 4 2.438 .438-D LD Spicer
3-1-4141 10 1.375 2.125 1.062 2.750 3.750 4 1.656 .438-D LD Spicer
3-1-751 10 1.375 2.125 2.000 2.750 3.750 4 2.438 .438-D LD Spicer
3-1-2311 10 1.375 2.125 2.000 2.750 3.750 4 2.516 .438-D LD Spicer
3-1-3191 10 1.500 2.250 2.000 2.750 3.750 4 2.375 .438-D LD Spicer
3-1-2431 10 1.500 2.125 2.000 2.750 3.750 4 2.438 .438-D LD Spicer
3-1-3341 10 1.500 2.250 2.188 2.750 3.750 4 3.062 .438-D LD Spicer
3-1-3431 10 1.500 2.000 2.188 2.750 3.750 4 2.906 .438-D, .310 Counterbore at hub end LD Spicer
3-1-1151 10 1.500 2.125 2.000 2.750 3.750 4 2.562 .438-D LD Spicer
4-1-2701 10 1.500 2.125 2.000 3.750 4.750 4 2.625 .500-D LD Spicer
4-1-3571 10 1.625 2.250 2.125 3.750 4.750 4 2.688 .500-D HD Spicer
3-1-1521 10 1.750 2.625 2.250 2.750 3.750 4 3.125 .438-D HD Spicer
3-1-3211 10 1.750 2.250 2.188 2.750 3.750 4 2.812 .438-D HD Spicer
4-1-3171 10 1.750 2.375 2.188 3.750 4.750 4 2.812 .500-D HD Spicer
4-1-5131 10 1.750 2.500 1.938 3.750 4.750 4 2.734 .500-D HD Spicer
4-1-3891 10 1.750 2.500 2.250 3.750 4.750 4 3.000 .500-D HD Spicer
4-1-3101 10 1.750 2.625 2.250 3.750 4.750 4 2.875 .500-D HD Spicer
4-1-5211X 10 1.750 2.500 2.000 3.750 4.750 4 3.547 .500-D HD Spicer
6-1-1761 10 1.750 2.750 2.250 7.750 7.250 8 2.938 .375-D HD Spicer
6.5-1-271 10 1.960 2.957 2.620 7.750 0.000 0 3.312 D HD Spicer
5-1-6561X 10 1.962 2.750 2.797 5.312 6.125 8 4.594 .375-D HD Spicer
4-1-2361 10 2.000 2.938 3.000 3.750 4.750 4 3.625 .500-D HD Spicer
5-1-3161 10 2.000 2.938 3.000 6.625 6.125 8 3.625 .375-D HD Spicer
5-1-3141 10 2.000 2.750 3.000 6.625 6.125 8 3.625 .375-D HD Spicer
6-1-2221 10 2.000 2.750 3.000 7.750 7.250 8 3.688 .375-D HD Spicer
6-1-951 10 2.250 3.500 3.000 7.750 7.250 8 3.688 .375-D HD Spicer
6.5-1-3041 10 2.500 3.500 3.000 6.500 0.000 12 3.688 HD Spicer
6-1-4481 10 2.500 3.250 3.000 7.750 7.250 8 3.688 .375-D HD Spicer
6-1-5741 10 2.500 3.250 3.000 7.750 7.250 8 3.620 .378-D, .880 Counterbore at hub end HD Spicer
6.5-1-2041 10 2.500 3.500 2.410 7.750 7.250 12 3.310 .440-D HD Spicer
6.5-1-741 10 2.750 3.500 3.000 7.750 7.250 12 4.062 .438-D HD Spicer
6.5-1-2361X 10 2.750 3.750 3.000 7.750 7.250 12 4.062 .438-D, Slinger #231616 HD Spicer
6-1-2381 10 2.750 3.500 3.000 8.000 7.250 8 3.688 .375-D, Use with thru stop brake disc. HD Spicer
6.5-1-951 10 3.000 4.000 3.062 7.750 7.250 12 3.750 .440-D HD Spicer
4801-101 10 1.750 2.148 2.728 3.150 4.343 .480 2.717 Isuzu / Mates with 4802-1244 HD PTI
4-1-5341 13 1.755 0.000 2.825 3.750 4.750 4 3.760 .509-D, Hub diameter not ground HD Spicer
5-1-6511 13 1.755 3.062 2.915 6.625 6.125 8 3.625 .375-D HD Spicer
2-1-2581 15 1.010 2.125 1.312 2.375 3.125 4 2.000 .375-D LD Spicer
6-1-5581 16 2.350 3.312 2.750 7.750 7.250 8 3.438 .375-D, For use on coupling shaft HD Spicer
6.5-1-1811 16 2.350 3.317 2.750 7.750 7.250 12 3.438 .438-D, For use on coupling shaft HD Spicer
6-1-4541 18 2.364 3.500 3.375 7.750 7.250 8 4.031 .375-D, Brake drum pilot 6.656 HD Spicer
6.5-1-2301 18 2.364 2.750 2.328 7.750 7.250 12 3.000 .438-D HD Spicer
6.5-1-1801 18 2.364 3.500 3.375 7.750 7.250 12 4.031 .438-D HD Spicer
6-1-5601X 18 2.422 3.375 3.000 7.750 7.250 8 3.690 .378-D HD Spicer
8-1-131X 19 2.500 3.500 4.000 6.438 0.000 8 5.500 NOT AUTH TO PURCHASE THRU DANA HD Spicer
6.5-1-1361 19 2.503 3.500 3.000 7.750 7.250 12 3.844 .438-D, .250 Counterbore at hub end HD Spicer
6.5-1-2161 20 2.560 3.500 3.344 7.750 7.250 12 4.000 .438-D HD Spicer
2006269 21/24 1.250 1.875 1.488 2.559 4.250 4 2.787 .500, Slinger #2002304 LD Spicer
1301-231 23 0.990 1.500 1.530 1.808 3.340 4 2.234 Toyota Mid-ship, SQ LD PTI
3-1-3971 23 1.520 2.125 2.047 2.750 3.750 4 2.609 .438-D LD Spicer
1301-232 23 0.990 1.495 1.540 3.937 3.386 6 3.170 Uses 2352-1001 (plunge) LD PTI
6-1-5511 25 2.625 3.500 3.016 7.750 7.250 8 3.625 .375-D HD Spicer
2-1-1881X 26 1.146 1.554 1.500 2.375 3.125 4 2.594 .375-D, Brake drum pilot 2.55 LD Spicer
3101-262 26 1.146 1.554 1.535 3.937 3.386 6 3.170 Uses 2352-1001 (plunge) LD PTI
3101-262M 26 1.146 1.450 1.535 3.937 3.386 6 3.170 Uses 2352-1001 (plunge) LD PTI
3101-261 26 1.146 1.400 1.535 3.937 3.386 6 3.170 Uses 2352-1001 (plunge) LD PTI
3R01-02 27 1.188 1.521 1.475 2.875 3.937 4 1.985 LD PTI
315DIN-1-71X 27 3.503 5.003 4.185 6.888 11.024 8 5.850 .875-D, Slinger #231574 not sold separately HD Spicer
8-1-791X 27 3.503 5.005 4.000 7.000 8.250 8 5.188 .625-D, Slinger #230922 HD Spicer
1301-271 27 1.121 1.495 1.660 1.811 3.340, 3.674 0.323, 0.405, 0.445 2.250 Toyota 8 inch, 0.323 on 3.340 rec, 0.405 on 3.340 sq, 0.445 on 3.674 sq, forged LD PTI
3101-282 28 1.218 1.812 1.252 2.000 3.50/4.250 8 1.985 Dual pattern M12-1.75, Ford 7.5 use with 3302-949, P2-2-949, 3102-1379, 3302-1369, 3502-1580, 4102-1819 LD PTI
3501-291 29 1.263 1.875 1.500 2.161 3.937 8 2.000 Chy 9.25, threaded bolt holes LD PTI
2010948 29 1.276 1.875 1.500 2.000 4.250 8 2.000 Dana 60/70 Pinion Conversion Flange, M12-1.75 LD Spicer
2010949 29 1.270 1.875 1.500 3.750 4.750 8 1.950 Dana 60/70 Pinion Conversion Flange, M12-1.75 LD Spicer
3301-302 30 1.312 1.812 1.250 2.000 3.50 / 4.25 8 1.588 Ford 8.8, Dual threaded bolt patterns LD PTI
4801-301 30 1.590 2.370 1.642 3.750 4.750 4x .475 2.504 Dodge 10.5/11.5 Rear LD AAM
3R01-292 30 1.312 2.110 1.150 2.150 2.913 4/.334 3.125 Chry 9.25" Front / Serrated Flange LD PTI
2801-301 30 1.250 1.848 1.000 0.000 100mm 3/86mm bolt to bolt 2.200 Pinion Tri-Flange V6 12/18 Bolt hole LD PTI
3301-303 30 1.312 1.812 1.250 2.000 4.25 M12-1.75 1.570 Ford 8.8, forged LD PTI
85524483 30 1.312 1.940 1.150 3.740 3.182 (6) M10-1.5 2.675 2019+ GM Truck 1500 Front Diff, 84428329, fits 3102-9501 LD GM
3301-312 31 1.343 1.812 1.640 2.000 3.50 / 4.25 8 1.955 Dual threaded bolt patterns, M12-1.75mm, Ford Rear 9.75 LD PTI
YC3Z4851AB 31 1.343 1.812 1.640 2.000 4.250 8 1.955 OE Ford (see 3301-312) LD AAM
3301-1356 31 1.380 1.890 2.000 2.000 4.25 4 / .500 2.500 SQ Pattern, Counter Bore .25 , Borg Warner TC 1356 LD PTI
3501-311 31 1.387 2.205 1.620 2.953 4.750 4 2.500 Ford conversion for 6R80 to UJ flange (3502-1859, 4102-1839), requires 34mm 12pt socket LD Ford
4801-311 31 1.343 1.812 1.640 2.953 4.750 M12-1.75 2.000 Ford 10.25, 10.5, forged LD PTI
5501-311 31 1.686 2.677 1.720 3.500 4.750 M10-1.5 2.250 Mopar 11.50, Serrated for 5502-531 LD PTI
5501-312 31 1.686 2.677 3.750 4.750 Mopar 11.50, for 5502-371 LD PTI
HR3Z-4851-B 31 1.343 1.812 1.710 4.330 3.660 (6) M10-1.5 3.733 Ford Mustang 15-21 w/ Shelby option, fits 3502-433X LD Ford
3501-3111 31 1.387 2.205 1.620 2.953 4.750 4 2.500 Ford conversion for 6R80 to UJ flange (3502-1859, 4102-1839), requires 34mm 12pt socket LD PTI
3301-000 32 1.401 2.125 2.000 1.808 Blank 0 2.250 5.475 OD LD PTI
3301-201 32 1.401 2.125 2.000 2.000 3.5, 4.25 8 2.125 Counterbore depth .421", use w/3594-2000U or equv. Ford NP205 NP203, M12-1.75mm LD PTI
5-1-02710 32 2.114 3.000 2.250 0.000 5.118 4 3.500 .512, Serrated face flange HD Spicer
5-1-02710 32 2.114 3.000 2.250 0.000 5.118 4 3.500 .512 -Replaced 5002710, Serrated face flange HD Spicer
3-1-32R 32 1.401 1.943 2.000 2.000 4.250 4 2.530 Rear 2007-2017 JEEP JK T-case Adapter LD PTI
3-1-32JK 32 1.401 1.943 2.000 2.000 4.250 4 3.810 Front 2007-2017 JEEP JK T-case Adapter LD PTI
N3-1-JK07 32 1.401 1.943 2.000 3.125 4.250 4 3.810 Front 2007-2017 JEEP JK T-case Adapter LD Neapco
N3-1-JK05 32 1.401 1.943 2.000 3.125 4.250 4 2.530 Rear 2007-2017 JEEP JK T-case Adapter LD Neapco
3501-321 32 1.401 1.943 2.000 2.000 4.250 4 4.000 Front 07-17 JEEP JK T-case Adapter, can use 3594-2000U, M12-1.75mm , 4 holes drilled for M12 hardware LD PTI
3501-322 32 1.401 1.943 2.000 2.000 4.250 4 2.625 Rear 2007-2017 JEEP JK T-case Adapter, can use 3594-2000U, M12-1.75mm, 4 holes drilled for M12 hardware LD PTI
4-1-5201X 34 1.790 2.562 2.750 3.750 4.750 4 3.344 Assembly includes plug 231059 and four 8-73-226 bolts HD Spicer
5-1-02709 34 1.790 2.625 2.188 0.000 5.118 4 2.590 .512, Serrated face flange HD Spicer
5-1-02709 34 1.790 2.625 2.188 0.000 5.118 4 2.590 .512 - Replaced 5002709, Serrated face flange HD Spicer
4-1-4501X 34 1.790 2.562 2.750 3.750 4.750 4 3.344 .500-D, Assembly includes plug 231059 HD Spicer
90-1-21X 34 1.790 2.562 2.750 5.312 6.125 8 3.719 .375-D, Assembly includes plug 231059 HD Spicer
5-1-5121X 34 1.790 2.562 2.781 6.625 6.125 8 3.938 .375-D, Assembly includes plug 231059 HD Spicer
6-1-4701X 34 1.790 2.562 2.688 7.750 7.250 8 3.903 .375-D, Assembly includes plug 231059 HD Spicer
5-1-6471X 38 1.998 2.750 2.125 5.312 6.125 8 4.688 .375-D HD Spicer
6-1-5851X 38 1.998 2.750 2.141 6.436 7.250 8 4.703 .375-D HD Spicer
70-1-11159X 39 2.024 3.001 1.816 3.750 4.750 8 3.074 .500 HD Spicer
70-1-11156X 39 2.024 0.000 1.816 2.953 4.747 8 3.074 D HD Spicer
70-1-09516X 39 2.024 2.875 1.816 6.625 0.000 0 2.413 HD Spicer
6.5-1-2401X 44 2.274 2.938 2.500 7.750 7.250 12 3.094 .438-D, Slinger #231022 HD Spicer
6-1-4671 46 2.390 3.500 3.375 7.750 7.250 8 4.547 .375-D HD Spicer
5-1-2541 6 2.225 3.000 3.250 6.625 6.125 8 3.875 .375-D HD Spicer
6-1-1731 6 2.225 3.000 3.250 7.750 7.250 8 3.750 .375-D HD Spicer
6.5-1-481 6 2.225 3.000 3.250 7.750 7.250 12 3.750 .438-D HD Spicer