Catalogs

Components By Series

print This page

1350 Series

Center Supports

PICTURE PART NUMBER MAKE MODEL AND YEAR BEARING ID CC OF HOLES NOTES
3580-10
click on the picture to expand		 3580-10 Ford Pickup 1.574 6.625
3580-20
click on the picture to expand		 3580-20 Dodge 2003+ Pickup 1.574 6.625 Square
3580-30
click on the picture to expand		 3580-30 GM 2011+ Pickup 1.574 4.331 Square outer & hex inner bracket. Studs in bracket.
3580-34
click on the picture to expand		 3580-34 Dodge Sprinter 1.378 7.625 Used in 1350 series new shaft conversions
3580-40
click on the picture to expand		 3580-40 Nissan Nissan Titan, Frontier, Van 2004+ 1.574 6.625 Rubber cushion with canister

Companion Flanges

PART NUMBER SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE FACE TO END PILOT DIA. BOLT CIRCLE DIA. NOTES
3301-000 32 1.401 2.125 2.000 2.250 Blank Blank 5.475 OD
3301-201 32 1.401 2.125 2.000 2.125 2.000 Dual 3.500 & 4.25 threaded bolt holes
3501-291 29 1.263 1.875 1.500 2.000 2.161 3.937 Chy 9.25, threaded bolt holes

End Yokes

PART NUMBER SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END UJOINT NOTES
3503-324 31/32 1.378 1.885 5.594 1350 Replaces 3-4-13211-1 which was a bolt-on / This part has a welch plug that can be removed to make it a bolt on / Use with strap kit 3570-20
3504-01 29 1.276 1.875 1.500 3.000 1350 Strap type
3504-02 28 1.229 1.844 1.375 3.031 1350 Strap type
3504-03 31 1.343 1.812 1.262 3.143 1350 Strap type / Double check length thru the hole
3504-04 30 1.312 2.110 1.150 3.125 1350 Requires strap kit 3570-20 / Includes new pinion seal
3504-05 30 1.590 2.200 1.642 3.913 1350 Requires strap kit 3570-20 / Use Pinion Seal 2286 for replacement of yokes with 2.372 hub diameter
3504-06 26 1.146 1.552 1.500 3.000 1350 Strap type
3504-07 30 1.328 1.739 1.220 3.175 1350 U-bolt type
3504-07B 30 1.328 1.739 1.184 3.250 1350 U-bolt type / Billet steel / Includes u-bolts and spacer (if required)
3504-08 28 1.218 1.812 2.425 4.000 1350 U-bolt type
3504-08B 28 1.218 1.812 2.155 4.100 1350 U-bolt type / Billet steel / Includes u-bolts and spacer (if required)
3504-09 31 1.343 1.812 1.640 3.500 1350 Strap type
3504-10 10 1.188 1.875 1.656 3.125 1350 Strap type
3504-101 10 1.375 N/A 1.500 3.188 1350 U-bolt type
3504-10B 10 1.188 1.875 1.500 3.375 1350 U-bolt type / Billet steel / Includes u-bolts and spacer (if required)
3504-291 29 1.276 1.750 1.500 3.188 1350 Mates with stub 3153-291 and 3153-292 / Strap type
3504-35B 35 1.515 2.125 2.100 4.000 1350 U-bolt type / Billet steel / Includes u-bolts and pinion nut
3504-60 29 1.276 1.875 1.500 3.375 1350 U-bolt type / 10 bolt cover

Flange Yokes

PART NUMBER PILOT DIA. BOLT CIRCLE DIA. BOLT HOLE DIA. FACE TO C/L UJOINT NOTES TYPE
3502-1579 2.000 F 4.250 .500 1.625 1350 Same as 3-2-1579 STD
3502-1619 2.000 F 4.250 .470 1.625 1350 Replaces 3-2-1619 / Bolt holes are 12mm threaded STD
3502-188 1.808 4.872 .484 1.875 1350 Same as Dana 5004010
3502-21 2.000 F 4.250 Threaded 1.625 1350 Ford CV flange CV
3502-216 2.162 3.937 .489 1.625 1350 STD
3502-221 2.245 F 4.000 .400 2.578 1350 Sprinter thru 2006 STD
3502-261 2.638 F 4.410 .400 2.578 1350 Sprinter from 2007 STD
3502-280 2.858 4.500 .500 2.015 1350 96-02 GM full size vans STD
3502-312CV 3.125 4.250 .465 1.625 1350 Fits 3R Saginaw applications CV
3502-42 2.680 F 4.250 Threaded 1.625 1350 Ford CV flange CV

Flange Yokes-Metric

PART NUMBER OUTSIDE DIA. NUMBER OF HOLES BOLT HOLE DIA. UJOINT SERIES
3502-1068 100mm/3.937 6 8mm/.315 1350
3502-1088 100mm/3.937 8 8mm/.315 1350

H Yokes

PART NUMBER C/L TO C/L NOTES
3524-21 2.875 1350 Barrel type

Pinion Yokes

DIFF MODEL PART NUMBER SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END UJOINT NOTES
Chrysler 9.25 3501-291 29 1.263 1.875 1.500 2.000 Chy 9.25 / Threaded bolt holes
Dana 60 3504-01 29 1.276 1.875 1.500 3.000 1350 Strap type,
10 bolt cover
Dana 70 3504-01 29 1.276 1.875 1.500 3.000 1350 Strap type
AMC 20 3504-02 28 1.229 1.844 1.375 3.031 1350 Strap type
Ford 10.25 3504-03 31 1.343 1.812 1.262 3.143 1350 Strap type / Double check length thru the hole
GM 9.5 3504-04 30 1.312 2.110 1.150 3.125 1350 Requires strap kit 3570-20 / Includes new pinion seal
GM 10.5 3504-05 30 1.590 2.200 1.642 3.913 1350 Requires strap kit 3570-20,
Use Pinion Seal 2286 for replacement of yokes with 2.372 hub diameter
Dana 44 3504-06 26 1.146 1.552 1.500 3.000 1350 Strap type
GM 8.875 3504-07 30 1.328 1.739 1.220 3.175 1350 U-bolt type
GM 8.875 3504-07B 30 1.328 1.739 1.184 3.250 1350 U-bolt type / Billet steel / Includes u-bolts and spacer (if required)
Ford 9 3504-08 28 1.218 1.812 2.425 4.000 1350 U-bolt type
Ford 9 3504-08B 28 1.218 1.812 2.155 4.100 1350 U-bolt type / Billet steel / Includes u-bolts and spacer (if required)
Ford 10.25 3504-09 31 1.343 1.812 1.640 3.500 1350 Strap type / Double check length thru the hole
Ford 10.5 3504-09 31 1.343 1.812 1.640 3.500 1350 Strap type
Chrysler 8.75 3504-10 10 1.188 1.875 1.656 3.125 1350 Strap type
Chrysler 8.75 3504-10B 10 1.188 1.875 1.500 3.375 1350 U-bolt type / Billet steel / Includes u-bolts and spacer (if required)
Ford 9 3504-35B 35 1.515 2.125 2.100 4.000 1350 U-bolt type / Billet steel / Includes u-bolts and pinion nut
Dana 60 3504-60 29 1.276 1.875 1.500 3.375 1350 U-bolt type,
10 bolt cover

Small Parts and Kits

PART NUMBER PART TYPE DESCRIPTION
3570-20 Strap kit 1350 GM Series strap kit includes (2) straps and (4) bolts 1.375 long

Splined Sleeves

PART NUMBER SPLINE COUNT MAJOR SPLINE DIA. BUTT DIA. TUBE SIZE END TO WELD
3533-300 16 1.500 2.884 3.00X.065 6.000

Splined Stubs

PART NUMBER SPLINE COUNT MAJOR SPLINE DIA. END TO POINT OF WELD TUBE SIZE NOTES
3153-291 29 1.276 3.500 3.00X.083 Midship type / Fits with 3304-291 and 3504-291
3153-292 29 1.276 3.500 3.50X.083 Midship type / Fits with 3304-291 and 3504-291

Transfer Case Yokes

TC MODEL PART NUMBER SPLINE THRU HOLE GROUND HUB DIA. C/L TO END UJOINT NOTES
NP 203/205 3301-000 1.401-32 2.000 2.125 2.250 N/A Blank flange adapter
NP 203/205 3301-201 1.401-32 2.000 2.125 2.125 N/A Companion Flange with 2.000" male pilot and 3.5" and 4.25" threaded bolt circle.

Transmission Yokes

PART NUMBER SPLINE COUNT MAJOR SPLINE DIA. C/L TO END GROUND HUB DIA. UJOINT NOTES
3503-270 26/27 1.176 6.900 1.500 1350 Recessed spline non-vented /TH350/700
3503-281 27/28 1.220 6.625 1.500 1350 Non-vented
3503-282 27/28 1.220 6.625 1.600 1350 Non-vented
3503-311 30/31 1.391 8.440 1.685 1350 Replaces Dana 3-3-3851X, Ford applications W/dampner
3503-31CV 30/31 1.391 7.312 1.885 1350 Replaces Dana 3-3-5431X,
Ford applications
3503-32 31/32 1.378 8.000 1.886 1350 Full spline non-vented,
TH400 208/241
3503-320 31/32 1.378 6.875 1.885 1350 Superseded to 26045229
3503-322 31/32 1.378 7.875 1.885 1350 Full spline non-vented with dampener/ TH400 208/241
3503-323 30/32 1.377 6.102 1.730 1350 Counter bore depth .393
3503-324 31/32 1.378 5.594 1.885 1350 Replaces 3-4-13211-1 which was a bolt-on. This part has a welch plug that can be removed to make it a bolt on. Use with strap kit 3570-20.
3503-326 31/32 1.378 5.500 1.885 1350 Same as Dana 3-3-2431X
3503-32CV 31/32 1.378 7.312 1.885 1350 Full spline non-vented,
208/241 transfer case CV yoke

Weld Yokes

PART NUMBER BUTT DIA. TUBE SIZE C/L TO WELD UJOINT NOTES
3526-20 1.766 2.00X.120 1.438 1350 CV ball stud weld yoke
3526-201 1.766 2.00X.120 2.125 1350 Forged, extra thick ears
3526-25 2.320 2.50X.095 1.438 1350 CV ball stud weld yoke
3526-28 2.594 2.75X.083 1.438 1350 CV ball stud weld yoke
3526-30 2.844 3.00X.083 1.438 1350 CV ball stud weld yoke
3526-30A 2.757 3.00X.125 2.500 1350 Aluminum
3526-35 3.334 3.50X.083 1.438 1350 CV ball stud weld yoke
3526-35A 3.257 3.50X.125 1.750 1350 Aluminum
3526-40A 3.757 4.00X.125 2.215 1350 Aluminum
3526-501A 4.888 5.00X.065 4.110 1350 Aluminum
3526-50A 4.000 4.17X.083 2.145 1350 Aluminum
3526-51A 4.755 5.00X.125 2.875 1350 Aluminum