Catalogs

Components By Series

print This page

1310 Series

Center Supports

PICTURE PART NUMBER MAKE MODEL AND YEAR BEARING ID CC OF HOLES NOTES
3180-10
click on the picture to expand
3180-10 Ford Ranger (90-95) 1.181 5.875
3180-20
click on the picture to expand
3180-20 Ford Mazda Ranger/B Series pickup 1.181 5.875
3180-45
click on the picture to expand
3180-45 Chevrolet Impala
Pickup (58-72)
1.188 1.500 Billet aluminum bracket with urethane, original bearing size
3180-46
click on the picture to expand
3180-46 Chevrolet Impala
Pickup (58-72)
1.378 1.500 Billet aluminum bracket with urethane, larger bearing size
3180-47
click on the picture to expand
3180-47 Chevrolet Impala
Pickup (58-72)
1.574 1.500 Billet aluminum bracket with urethane, larger bearing size
3180-50
click on the picture to expand
3180-50 Mercedes ML Series (98-03) 1.181 4.000
3180-99
click on the picture to expand
3180-99 - Multiple applications 1.574 Urethane insert for standard 1.25" bracket

Companion Flanges

PART NUMBER SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE FACE TO END PILOT DIA. BOLT CIRCLE DIA. NOTES
3101-262 26 1.146 1.495 1.535 3.170 3.937 3.386 Toyota 100mm CV
3301-000 32 1.401 2.125 2.000 2.250 Blank Blank 5.475 OD
3301-201 32 1.401 2.125 2.000 2.125 2.000 Dual 3.500 & 4.25 threaded bolt holes

CV Head Assemblies

PART NUMBER PILOT DIA. BOLT CIRCLE DIA. BOLT HOLE DIA. TUBE SIZE UJOINT NOTES
3190-100 3.819 3.386 .330 2.5X.083 GKN type Fits 98-04 Mercedes ML320/ML350 front shaft at diff and rear shaft at transfer case
3190-107 4.094 3.583 .330 1.75X.095 GKN type Fits 97-98 Ford Ranger/Explorer at transfer case
3190-181 1.808 3.575 .331 2.00X.120 2.56X.067 1310 Toyota/1310CV conversion / Includes increase bushing for OEM tubing
3190-182 1.808 3.665 .388 2.00X.120 2.56X.067 1310 Toyota/1310CV conversion / Includes increase bushing for OEM tubing
3190-183 1.808 3.340 .404 2.00X.120 2.56X.067 1310 Toyota/1310CV conversion / Includes increase bushing for OEM tubing
3190-184 1.808 3.670 .445 2.00X.120 2.56X.067 1310 Toyota/1310CV conversion / Includes increase bushing for OEM tubing

End Yokes

PART NUMBER SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END UJOINT NOTES
3104-01 23 1.031 1.552 1.500 3.000 1310 Strap type
3104-02 26 1.146 1.844 1.375 2.938 1310 Strap type
3104-03 26 1.146 1.552 1.500 3.000 1310 Strap type
3104-05 27 1.188 1.521 1.475 3.185 1310 Strap type
3104-07 28 1.229 1.844 1.375 2.938 1310 Strap type
3104-09 30 1.328 1.739 1.170 2.850 1310 Requires strap kit 2-70-28X
3104-10 10 1.125 1.552 1.500 3.000 1310 Strap type
3104-17 17 1.310 1.739 1.181 2.595 1310 U-bolt type
3104-231 23 1.260 1.562 1.625 3.062 1310 Counterbore at hub end
3104-25 25 1.085 1.521 1.500 2.875 1310 U-bolt type
3104-262CV 26 1.146 1.614 1.500 3.000 1310 CV conversion yoke for Dodge/Jeep on front output / Splines counterbored on bottom / Includes hub sleeve
3104-26CV 26 1.146 1.562 1.500 3.000 1310 Same as 2-4-4341
3104-27 27 1.172 1.688 1.062 2.750 1310 Strap type
3104-28 28 1.218 1.812 2.425 4.000 1310 U-bolt type
3104-28A 28 1.218 1.812 2.155 3.850 1310 U-bolt type / Billet aluminum / Includes u-bolts and spacer (if required)
3104-29 29 1.276 1.875 1.500 2.938 1310 Strap type
3104-30 30 1.312 1.940 1.150 3.160 1310 U-bolt type
3104-301 30 1.328 1.739 1.181 2.598 1310 U-bolt type
3104-321CV 32 1.401 1.943 2.000 3.875 1310 CV conversion yoke for 07 and up Jeep JK on front or rear output / Splines counterbored top and bottom / Includes hub sleeve
3104-322CV 32 1.401 1.943 2.000 3.875 1310 CV conversion yoke for 03-06 Jeep Rubicon / Splines counterbored at bottom only / Includes hub sleeve
3104-32CV 32 1.401 1.875 2.000 3.875 1310 Same as 2-4-5341

Flange Yokes

PART NUMBER PILOT DIA. BOLT CIRCLE DIA. BOLT HOLE DIA. FACE TO C/L UJOINT NOTES TYPE
3102-063 0.630 3.938 .489 2.00 1310 Fits Jeep's at transmission STD
3102-1379 2.000 F 4.250 .500 2.125 1310 STD
3102-15 1.808 3.340 sq .410 1.750 1310 Toyota truck STD
3102-16 1.808 3.340 rec .335 1.625 1310 Toyota truck STD
3102-17 1.808 3.575 rec .450 2.718 1310 Toyota Land Cruiser STD
3102-170 1.772 3.346 .410 2.671 1310 Suzuki/Geo STD
3102-171CV 1.772 3.346 .400 1.625 1310 Suzuki/1310CV conversion CV
3102-172 1.772 3.120 .325 2.671 1310 Suzuki/Geo STD
3102-172CV 1.772 3.120 .325 1.625 1310 Suzuki/1310CV conversion CV
3102-173 1.772 3.400 .337 1.685 1310 Mitsubishi STD
3102-18 1.808 3.340 rec .410 2.718 1310 Toyota Land Cruiser STD
3102-181CV 1.808 3.575 rec .331 1.625 1310 Toyota/1310CV conversion CV
3102-182CV 1.808 3.665 rec .388 1.625 1310 Toyota/1310CV conversion CV
3102-183CV 1.808 3.340 sq .404 1.625 1310 Toyota/1310CV conversion CV
3102-184CV 1.808 3.670 sq .445 1.625 1310 Toyota/1310CV conversion CV
3102-185 1.808 3.661 sq .445 1.687 1310 Toyota STD
3102-186CV 1.808 3.340 rec .404 1.625 1310 Toyota/1310CV conversion CV
3102-187 1.808 3.078 sq .335 1.687 1310 Toyota Car / 1310 version of 2302-23 STD
3102-191 1.967 3.200 .325 1.750 1310 Subaru STD
3102-20 1.967 2.950 .395 1.772 1310 Nissan STD
3102-21 1.967 3.200 .395 1.772 1310 Nissan STD
3102-211CV 2.150 F 3.937 .485 1.625 1310 03-06 Jeep Rubicon mates to factory flange / Double check pilot before ordering / See also 3102-212CV CV
3102-212CV 2.162 F 3.937 .485 1.625 1310 03-06 Jeep Rubicon mates to factory flange / Double check pilot before ordering / See also 3102-211CV CV
3102-216 2.163 4.520 .489 2.00 1310 Fits Jeep's at differential STD
3102-231CV 2.375 3.125 .375 1.625 1310 Land Rover/1310 conversion,
Same pattern as 2-2-329
CV
3102-251CV 2.559 3.750 .402 1.625 1310 Land Rover/1310 conversion CV
3102-275 2.750 3.750 .402 1.500 1310 CV Style fits 1998-2004 Mercedes ML320/ML350 on front shaft at transfer case CV
3102-329 2.375 3.125 .375 1.375 1310 Forged
3102-33 2.560 3.346 .406 1.766 1310 Isuzu STD
3102-35 1.700 Special .465 1.500 1310 Bolts to flywheel in boat applications / Special slotted bolt holes to fit small block and big block GM engines STD
3102-36 3.625 OD 2.875 .375 1.375 1310 Detroit bell/pot style conversion STD
3102-361 2.362 3.543 .410 1.685 1310 Kia 1310 Series STD
3102-37 2.562 3.750 .484 1.781 1310 Nissan STD
3102-39 2.245 2.750 .315 1.625 1310 Nissan/Subaru STD
3102-391 3.935 OD 3.386 .415 2.592 1310 6 bolt holes / Used to replace CV joints with ujoint style shaft STD
3102-392CV 3.920 OD 3.386 .322 1.625 1310 This CV flange yoke has 6 bolt holes base on an 8 hole pattern / Used to replace CV joints on 2007 and later Jeep JK with double cardan CV at tranfer case CV
3102-393CV 3.935 OD 3.386 .328 1.625 1310 CV Flange Yoke with 4 bolt holes on a 6 bolt pattern / Jeep Cherokee and Dodge Durango/Dakota CV joint conversion CV
3102-40 4.000 OD 3.250 .385 2.750 1310 Detroit bell/pot style conversion STD
3102-411CV 4.094 OD 3.583 .328 1.625 1310 Ford Ranger/Explorer 1310CV conversion CV
3102-50 2.875 F 3.937 .413 2.671 1310 Bravada STD
3102-60 1.700 3.110 .477 1.500 1310 Bolts to flywheel in boat applications with GM 6.0L engines STD
3102-69 1.967 3.750 .475 1.750 1310 Nissan Infiniti STD
3102-91 4.094 OD 3.583 .328 2.672 1310 6 bolt holes / Ford CV joint conversion STD

Flange Yokes-Metric

PART NUMBER OUTSIDE DIA. NUMBER OF HOLES BOLT HOLE DIA. UJOINT SERIES NOTES
3102-1000 100mm/3.937 0 0 1310 Blank flange
3102-1068 100mm/3.937 6 8mm/.315 1310
3102-1250 125mm/4.922 0 0 1310 Blank flange
3102-1280 120mm/4.724 8 10mm/.394 1310
3102-9000 90mm/3.543 0 0 1310 Blank flange
3102-9048 90mm/3.543 4 8mm/.315 1310
3102-9068 90mm/3.543 6 8mm/.315 1310

H Yokes

PART NUMBER C/L TO C/L NOTES
3124-23 2.250 1310 H-bar type / Used in boat applications

Pinion Yokes

DIFF MODEL PART NUMBER SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END UJOINT NOTES
Dana 28 3104-01 23 1.031 1.552 1.500 3.000 1310 Strap type
Dana 35 3104-02 26 1.146 1.844 1.375 2.938 1310 Strap type
Dana 30 3104-03 26 1.146 1.552 1.500 3.000 1310 Strap type
Dana 44 3104-03 26 1.146 1.552 1.500 3.000 1310 Strap type
Dana 50 3104-03 26 1.146 1.552 1.500 3.000 1310 Strap type
GM 7.25 3104-05 27 1.188 1.521 1.475 3.185 1310 Strap type
AMC 20 3104-07 28 1.229 1.844 1.375 2.938 1310 Strap type
GM 8.875 3104-09 30 1.328 1.739 1.170 2.850 1310 Requires strap kit 2-70-28X
Dana 44 3104-10 10 1.125 1.552 1.500 3.000 1310 Strap type
GM 8.2 3104-17 17 1.310 1.739 1.181 2.595 1310 U-bolt type
GM 8.2 3104-25 25 1.085 1.521 1.500 2.875 1310 U-bolt type
Ford 8 3104-252 25 1.098 1.812 2.625 4.375 1310F U-bolt type
Chrysler 7.25 3104-27 27 1.172 1.688 1.062 2.750 1310 Strap type
Chrysler 8.25 3104-27 27 1.172 1.688 1.062 2.750 1310 Strap type
Ford 9 3104-28 28 1.218 1.812 2.425 4.000 1310 U-bolt type
Ford 9 3104-28A 28 1.218 1.812 2.155 3.850 1310 U-bolt type / Billet aluminum / Includes u-bolts and spacer (if required)
Dana 60 3104-29 29 1.276 1.875 1.500 2.938 1310 Strap type,
10 bolt cover
Dana 70 3104-29 29 1.276 1.875 1.500 2.938 1310 Strap type
GM 8.5 3104-30 30 1.312 1.940 1.150 3.160 1310 U-bolt type
GM 8.5 Vette 3104-301 30 1.328 1.739 1.181 2.598 1310 U-bolt type

Small Parts and Kits

PART NUMBER PART TYPE DESCRIPTION NOTES
3325-50 CV Repair Kit Center ball repair kit for 1310 & 1330 non-greasable CV socket Internal seal type

Splined Sleeves

PART NUMBER SPLINE COUNT MAJOR SPLINE DIA. BUTT DIA. TUBE SIZE END TO WELD
3133-250 16 1.375 2.500 Unmachined 5.500

Splined Stubs

PART NUMBER SPLINE COUNT MAJOR SPLINE DIA. END TO POINT OF WELD TUBE SIZE NOTES
3140-1701-3 16 1.375 7.750 1.25X.120 Full spline with dust cap
3140-1711 16 1.375 6.344 2.50x.083 2.250 Spline length, Same as 2-40-1711
3153-291 29 1.276 3.500 3.00X.083 Midship type / Fits with 3304-291 and 3504-291
3153-292 29 1.276 3.500 3.50X.083 Midship type / Fits with 3304-291 and 3504-291
3154-131 10 1.178 2.719 2.00X.095 Midship type / Same as 2-54-131 / Use with 2-4-1921

Transfer Case Yokes

TC MODEL PART NUMBER SPLINE THRU HOLE GROUND HUB DIA. C/L TO END UJOINT NOTES
Dana 18 3104-03 1.146-26 1.500 1.552 3.000 1310 Strap type
Dana 20 3104-03 1.146-26 1.500 1.552 3.000 1310 Strap type
Dana 300 3104-03 1.146-26 1.500 1.562 3.000 1310 Strap type
Dodge/Jeep 3104-262CV 1.146-26 1.500 1.614 3.000 1310 CV conversion yoke for Dodge/Jeep on front output / Splines counterbored on bottom / Includes hub sleeve
Dana 300 3104-26CV 1.146-26 1.500 1.562 3.000 1310 CV type
Dodge/Jeep 3104-321CV 1.401-32 2.000 1.943 3.875 1310 CV conversion yoke for 07 and up Jeep JK on front or rear output / Splines counterbored top and bottom / Includes hub sleeve
Dodge/Jeep 3104-322CV 1.401-32 2.000 1.943 3.875 1310 CV conversion yoke for 03-06 Jeep Rubicon / Splines counterbored at bottom only / Includes hub sleeve
NP 203/205 3104-32CV 1.401-32 2.000 1.875 3.875 1310 CV type
NP 203/205 3301-000 1.401-32 2.000 2.125 2.250 N/A Blank flange adapter
NP 203/205 3301-201 1.401-32 2.000 2.125 2.125 N/A Companion Flange with 2.000" male pilot and 3.5" and 4.25" threaded bolt circle.

Transmission Yokes

PART NUMBER SPLINE COUNT MAJOR SPLINE DIA. C/L TO END GROUND HUB DIA. UJOINT NOTES
3103-10 10 1.375 2.750 2.125 1310 Used in boat applications,
Fits onto standard jet drive
3103-11 10 1.375 3.375 2.125 1310 Used in boat applications,
Fits onto standard jet drive
3103-12 10 1.375 4.875 2.125 1310 Used in boat applications,
Fits onto standard jet drive
3103-163 16 1.172 4.875 1.500 1310 Same as 2-3-1331X
3103-21 21 1.104 6.000 1.495 1310
3103-21H 21 1.100 6.000 1.495 1310 Replaced by 3103-211
3103-23 23 1.200 5.750 1.575 1310 Toyota
3103-24 22/24 0.995 6.047 1.375 1310 Nissan/Subaru
3103-243 23/24 1.082 6.000 1.678 1310 Mitsubishi
3103-26 24/26 1.115 6.047 1.495 1310 Nissan
3103-271 26/27 1.176 4.875 1.500 1310 Early Corvette u-bolt style
3103-275 26/27 1.176 5.469 1.500 1310 Same as 2-3-6081X
3103-276 26/27 1.176 6.420 1.500 1310 Recessed spline non-vented. Same as 2-3-11071X
3103-277 26/27 1.176 6.750 1.500 1310
3103-278 26/27 1.176 8.000 1.500 1310
3103-27CV 26/27 1.176 5.875 1.500 1310 Jeep 231 transfer case CV yoke
3103-28 27/28 1.220 7.750 1.500 1310 Recessed spline non-vented,
Fits early Mustangs
3103-282 27/28 1.220 8.187 1.600 1310 Full spline non-vented,
Fits Explorer/Sport-Trac
3103-30 28/30 1.281 6.266 1.652 1310 Nissan
3103-30L 28/30 1.281 7.542 1.652 1310 Nissan Pathfinder
3103-323 30/32 1.377 6.102 1.731 1310 Counter bore depth .393

Weld Yokes

PART NUMBER BUTT DIA. TUBE SIZE C/L TO WELD UJOINT NOTES
3126-30A 2.757 3.00X.125 1.500 1310 Aluminum
3126-31A 2.844 3.00X.083 1.750 1310 Aluminum
3126-35A 3.257 3.50X.125 2.000 1310 Aluminum

Yoke Shafts

PART NUMBER SPLINE COUNT MAJOR SPLINE DIA. C/L TO END SPLINE LENGTH UJOINT NOTES
3182-32 32 1.378 9.500 3.500 1310CV CV conversion for GM Auto Trac